Восстановление прошивки Cisco AIR-AP1042

Материал из wiki.my-comp.net
63cda00e6efba44178c589d72e73f096.jpg

Требуется скачать:

Настройка сервера TFTpd

подключаемся к точке с помощью консольного кабеля

Putty connect.png

проверка flash памяти:

ap: fsck flash:
Are you sure you want to fsck "flash:" (could take some time) (y/n)?y
flashfs[0]: 3 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32385024
flashfs[0]: Bytes used: 5632
flashfs[0]: Bytes available: 32379392
flashfs[0]: flashfs fsck took 22 seconds.

ap:

форматирование flash памяти:

ap: format flash:
Are you sure you want to format "flash:" (all data will be lost) (y/n)?y
flashfs[0]: 0 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32385024
flashfs[0]: Bytes used: 1024
flashfs[0]: Bytes available: 32384000
flashfs[0]: flashfs fsck took 22 seconds.
Filesystem "flash:" formatted

ap:

Настройка сети

ap: set
DEFAULT_ROUTER=10.0.0.1
IP_ADDR=10.0.0.1
NETMASK=255.255.255.224

ap: set IP_ADDR 192.168.1.40
ap: set NETMASK 255.255.255.0
ap: set DEFAULT_ROUTER 192.168.1.1

ap: tftp_init
ap:

Скачивание и распаковка прошивки

ap: tar -xtract tftp://192.168.1.39/c1140-k9w7-tar.153-3.JB.tar flash:

ap: set BOOT flash:/c1140-k9w7-tar.153-3.JB/c1140-k9w7-tar.153-3.JB

ap: boot

Перезапуск

Loading "flash:/c1140-k9w7-mx.153-3.JB/c1140-k9w7-xx.153-3.JB"...##################################
File "flash:/c1140-k9w7-mx.153-3.JB/c1140-k9w7-xx.153-3.JB" uncompressed and installed, entry point: 0x4000
executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, C1040 Software (C1140-K9W7-M), Version 15.3(3)JB, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Wed 29-Apr-15 17:37 by prod_rel_team

Initializing flashfs...
FLASH CHIP:  Numonyx P33
Checking for Over Erased blocks
......................................................................................................................................................................................................................................................

flashfs[2]: 202 files, 7 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 32126976
flashfs[2]: Bytes used: 9240576
flashfs[2]: Bytes available: 22886400
flashfs[2]: flashfs fsck took 10 seconds.
flashfs[2]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 1 seconds.
flashfs[4]: Initialization complete....done Initializing flashfs.

Radio0  present 8363 8000 90020000 0 90030000 B
Rate table has 250 entries (12 legacy/64 11n/174 11ac)

POWER TABLE FILENAME = flash:/c1140-k9w7-mx.153-3.JB/T2.bin

Radio1  present 8363 8000 98020000 0 98030000 0
POWER TABLE FILENAME = flash:/c1140-k9w7-mx.153-3.JB/T5.bin

Ethernet speed is 1000 Mb - FULL duplex

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-AP1042N-R-K9 (PowerPC405ex) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FGL1538S29X
PowerPC405ex CPU at 333Mhz, revision number 0x147E
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radios

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: CC:EF:48:59:6C:79
Part Number                          : 73-14034-03
PCA Assembly Number                  : 800-34273-04
PCA Revision Number                  : A0
PCB Serial Number                    : FOC15344T1A
Top Assembly Part Number             : 800-34285-02
Top Assembly Serial Number           : FGL1538S29X
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1042N-R-K9



Press RETURN to get started!


*Mar  1 00:00:14.530: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar  1 00:00:14.533: *** CRASH_LOG = YES

*Mar  1 00:00:17.289: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar  1 00:00:17.472: Loading Power Tables from flash:/c1140-k9w7-mx.153-3.JB/T2.bin. Class = E
*Mar  1 00:00:17.472:  record size of 2ss: 404 read_ptr: 2321798

*Mar  1 00:00:18.322: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS
ap> : RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar  1 00:00:18.403: Loading Power Tables from flash:/c1140-k9w7-mx.153-3.JB/T5.bin. Class = R
*Mar  1 00:00:18.403:  record size of 2ss: 404 read_ptr: 2321798
Base Ethernet MAC address: CC:EF:48:59:6C:79

*Mar  1 00:00:21.889: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar  1 00:00:23.045: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar  1 00:00:24.054: Starting Ethernet promiscuous mode
*Mar  1 00:00:24.196: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar  1 00:00:24.196: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Mar  1 00:00:24.224: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1040 Software (C1140-K9W7-M), Version 15.3(3)JB, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Wed 29-Apr-15 17:37 by prod_rel_team
*Mar  1 00:00:24.224: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start
*Mar  1 00:00:24.257: No configuration in NVRAM..Auto Install initiated..
*Mar  1 00:00:25.171: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar  1 00:00:25.196: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar  1 00:00:25.196: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar  1 00:00:34.445: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.1.115, mask 255.255.255.0, hostname ap

*Mar  1 00:02:29.040: %CDP_PD-4-POWER_OK: Full power - NON_CISCO-NO_CDP_RECEIVED inline power source

Открываем в браузере вэб-морду Cisco IOS Series AP. У меня по DHCP поднялся адрес 192.168.1.115

Логин и пароль по умолчанию:

Login: root
Password: Cisco

Cisco web.png

доноры для материала[править]